<?xml version="1.0" encoding="UTF-8"?><rss version="0.92">
<channel>
	<title>ekadek electronics &#38; sound</title>
	<link>http://ekadek.com</link>
	<description>i make recording studio electronics and provide special sound services with my big fat recording studio</description>
	<lastBuildDate>Tue, 31 Aug 2010 04:13:28 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	<!-- generator="WordPress/3.0.1" -->

	<item>
		<title>ghetto blaster from hell</title>
		<description><![CDATA[an artist client wanted my old leak 20 system. bad. and ive had it sitting upright whilst fixing the preamp . and ive grown accustomed to the new vibe. the power amp has a custom dual trafo power supply right at the bottom there. and the amp chassis &#8230; with the original single power trafo [...]
]]></description>
		<link>http://ekadek.com/?p=851</link>
			</item>
	<item>
		<title>suitcase studio</title>
		<description><![CDATA[back in june 2009 benjamin hughes keys/singer/young mad scientist answered to my invite for someone to learn and help out at ekadek. already hes making really cool shit. and i can tell he&#8217;s great for business. his first project is this small 50s tape machine suitcase studio/live miking mixing rig. it features 4 neve/API (2 [...]
]]></description>
		<link>http://ekadek.com/?p=840</link>
			</item>
	<item>
		<title>the celestial lafayette luxman system</title>
		<description><![CDATA[local jazz legend NATHAN HAINES has long time been a friend of ekadek.  so even though i don&#8217;t work on alot of domestic music equipment,  i did  make him a stereo system &#8230; which i think he loves. here&#8217;s his testimony. &#8220;My brief for Ekadek was simple &#8211; I wanted to play my jazz vinyl [...]
]]></description>
		<link>http://ekadek.com/?p=824</link>
			</item>
	<item>
		<title>ekadek neever 835</title>
		<description><![CDATA[here&#8217;s the newest all transistor no chip off the old ekadek block. just soaking up some studio ambiance before jetting away to sunny canada. it has dual quarto transistor amp feedback/gain controlled stages followed by the super fat super clean neve 535 dual line amplifier.  microphone input or an instrument direct input. good for +24dbm. [...]
]]></description>
		<link>http://ekadek.com/?p=814</link>
			</item>
	<item>
		<title>chunky fenkner.  control room monitor</title>
		<description><![CDATA[this  small chunky control room monitor console is built for extreme flexibility and control and accuracy.  it uses a neveish transistor control room amplifier with stereo/reverse/mono/soloL/soloR/spk A.B.C.switch/VU meters with adjustable calibration and a best quality headphone amplifier. fed from a 4 X stereo input listen select switch &#8211; mix/daw/aux1/aux2. the &#8216;mix&#8217; selection to monitor an [...]
]]></description>
		<link>http://ekadek.com/?p=789</link>
			</item>
	<item>
		<title>famous neumann cmv 563 microphone</title>
		<description><![CDATA[this is a neumann cmv microphone im fixing up for a client. it came to me all messed around with and not going. somebody had attempted to modify it from its original ec92 amplifier into an ef86 without a clue as to how valves actually work!. the thing could never have gone. they were just [...]
]]></description>
		<link>http://ekadek.com/?p=782</link>
			</item>
	<item>
		<title>plate reverbing all up the place</title>
		<description><![CDATA[this is the driver attached to the plate with the soldered cylinder brass cone connector. and detail of the barcus berry pickup bud being held tight against the plate with a small piece of soft steel . this is the remote damper actuating mechanism that i have . its quite a thing well made. the [...]
]]></description>
		<link>http://ekadek.com/?p=750</link>
			</item>
	<item>
		<title>plate reverb further up the garden path</title>
		<description><![CDATA[this is the old blown up dilapidated one. see the handmade brass cone with the little nut retainer on the top &#8230; thats the kind of thing i need to make next for the new driver element. shaped from thin brass sheet and soldered. i have two types of pickup device ready to go. a [...]
]]></description>
		<link>http://ekadek.com/?p=742</link>
			</item>
	<item>
		<title>plate reverberation machine</title>
		<description><![CDATA[heres some details of my newest obsession. a pair of old plate reverb frames were to either come to me, or left to rust utterly.  they need complete rebuilding. starting with the spring wire tensioner bolt arrangements. they are all rusted and weak. the plate verb sound is all about the plate being tensioned just [...]
]]></description>
		<link>http://ekadek.com/?p=732</link>
			</item>
	<item>
		<title>klangenschmitt gogo2 soak testing</title>
		<description><![CDATA[at last the frame paint is dry enough to soak test this beast. so close to delivery. i&#8217;m rapt with the sound of this klangenschmitt. really fat clean bottom end. so powerful with so much headroom. the functionality is extreme with busses and inserts everywhere. 99% integrated circuit-free for that super expanded fabulous unsubdued sound.  [...]
]]></description>
		<link>http://ekadek.com/?p=725</link>
			</item>
</channel>
</rss>
